Sree Bloomy Graphic House manufactures Kodak Flexcel NX flexo plates for label, flexible packaging and corrugated converters — any size, anywhere. One contact. One system. Full accountability from file to press.
Fine detail, tight register, brand colour across high SKU counts. Every prepress call shows up on press.
Complex substrates, strict brand tolerances, multi-layer constructions. Plates must perform as a system.
Wide format, high speed, water-based systems. Consistent solids without plugging or pinholes.
The only named prepress methodology in the industry. No competitor — local or global — has built a system like this.
Whether you run 5 presses or 50 — these are the problems we solve, on every job, every time.
We study your press before touching a file. Approvals stop depending on luck and start depending on a system.
No rotating contacts. No re-explaining your press to someone new. One person knows your job history, your standards, and your press.
Cheap plates look good per sq.m. Rework, replates, and make-ready waste don't. We focus on cost per successful press run.
Global suppliers have the technology but wrong geography and pricing. Typical Indian suppliers have the pricing but not the process. We have both.
| What matters on press | Typical Indian supplier | Global suppliers | Sree Bloomy Graphic House |
|---|---|---|---|
| Plate technology | Basic digital / conventional | Strong — own systems | Kodak Flexcel NX flat top dot |
| Press-specific engineering | ✗ Generic spec | ✗ Standard production | ✓ Study your press first |
| Named prepress methodology | ✗ None | ✗ None | ✓ File-to-Press 5S Method |
| One stable contact per account | ✗ Rotates | ✗ Not offered | ✓ Permanent. Always. |
| Works for any converter size | Partial | ✗ Large only | ✓ Any size, any volume |
| India cost | ✓ | ✗ Premium pricing | ✓ |
| Shipping to Middle East / Africa | ✗ Limited | ✗ Not reliably | ✓ DHL Express |
| Segment-specific press knowledge | ✗ Plate-only view | Partial | ✓ Labels, flex pack, corrugated |
DHL Express to every region below. No other Indian plate manufacturer ships to all four consistently.
Whether you're a large multinational in the Middle East or a growing converter in East Africa — our process, our quality, and our accountability travel with every shipment.
No commitment. No vendor switch. Better results — side by side with your current supplier.
Kodak Flexcel NX and Esko CDI Crystal — the same systems used by the world's most demanding converters. From our facility in Bangalore, India.
The Flexcel NX produces flat top dots using Kodak's LAM process — eliminating the ink transfer unpredictability of conventional round-top-dot plates. Consistent density from makeready to the end of a run.
Same plate technology used by premium converters in Europe and the US. We run it from Bangalore at India manufacturing cost — with DHL shipping to your region.
Conventional plates have round tops. Under impression they spread unpredictably — that's why density shifts through a run. Flat top dots maintain consistent geometry under impression. Same ink density. Every sheet.
Spreads under impression — inconsistent density run to run
Consistent geometry — same ink density every run
Consistent laser ablation from edge to edge and plate to plate — no dot quality variation across large format plates.
Every trapping decision, screening choice, and colour separation made in prepress shows up on press — as waste, density variation, or rejected approvals.
Esko workflow gives us precise control over every variable before a plate is imaged. Problems your press would find at makeready are caught in our prepress — not on your clock.
Ask about your press setup →Best for most label and flexible packaging applications. Exceptional highlight stability and fine detail reproduction.
Higher durometer for demanding ink systems, solvent applications, or corrugated with high impression pressure.
Extended run lengths with consistent quality. Best for high-volume production where plate life is critical.
Tell us your press, ink system and substrate — we'll tell you exactly which variant.
Labels, flexible packaging, corrugated — each has distinct press physics. We know each one in depth. Find your segment below.
Label printing is unforgiving. Fine text, reverses, vignettes — every prepress decision shows up. High SKU counts mean inconsistency compounds quickly across repeat jobs.
We reverse-engineer every label job from your press output — studying anilox volumes, ink viscosity, and minimum dot hold on your specific substrate before a file is touched.
The most technically demanding flexo segment. Brand owners enforce strict colour tolerances. Substrates behave differently under tension. Film and foil interact with inks differently than paper.
We approach every flexible packaging job as a system — the plate is the output of understanding your full press, ink, and substrate environment. Not the starting point.
Post-print and pre-print corrugated demand plates that deliver consistent ink density at high speeds on challenging surfaces — without plugging solids or losing fine detail.
Wide format, high impression pressures, water-based systems. We configure plates specifically for your corrugated press — not off a standard specification.
We'll respond with exactly which plate specification suits your machine.
Print quality is not fixed on press. It is engineered upstream. This is the system we built — for every customer, every job, every time. No competitor has named or built a system like this.
Before a single file is touched, we understand your press — inks, substrates, anilox, quality expectations, and realistic limits. Most suppliers skip this entirely. We built our entire process around it.
We set expectations clearly, in writing, before prepress begins. What is achievable on your press. What isn't. How files should be prepared. What the approval criteria will be. No surprises at makeready.
Every department follows standardised checklists. File intake, prepress, plate imaging, quality check, packing. Quality is a system — not who is on shift today. This is how we make it repeatable.
Plates manufactured on Kodak Flexcel NX and imaged on Esko CDI — engineered to the press configuration we studied in step one. Not to a generic specification sheet. Domestic delivery or DHL worldwide.
One stable contact stays with your job until it runs predictably on press. Same person — always. Full context of your press, your history, and your standards. No handoffs. No re-explaining.
Unpredictable approvals. Rotating contacts. Repeated job explanations. Press problems nobody takes ownership of.
Predictable approvals. One contact who knows your press. Faster makeready. Consistent results — run after run, job after job.
No commitment. No vendor switch. Run one job through the 5S Method and compare — prepress process, approval rate, plate quality — side by side with your current supplier.
Request a Trial Job →No. We always start with one parallel trial job. Your existing vendors continue as normal. You compare the results side by side. If there's no measurable improvement, nothing changes.
DHL Express to Asia, Middle East, Africa and beyond. Transit typically 3–5 business days depending on destination. Total lead time from file approval to dispatch is committed at order time based on your press schedule.
The most honest question we get. The difference is the system, not just the machine. We run Kodak Flexcel NX — same technology as premium European and US converters. More importantly, we have a structured prepress qualification process before any file is touched. We'd rather show you that on one real job than try to convince you over a conversation.
Job-specific — because we engineer plates to your press, not off a standard price menu. A generic price list would give you the wrong answer. Share your job details and we'll give you an accurate, specific quote. Commercials are always discussed openly after we understand your setup.
Press make and model, ink system, substrate, anilox specification if available, and the print file. We'll ask the right questions — our Study step is designed to surface exactly what we need.
Every plate supplier claims quality and service. Here is what a decade of file-to-press accountability actually looks like.
The voices below belong to the production heads and owners we work with every week.
Testimonial slot — ask your longest-standing customer one question: "What changed after you started working with us?" Their answer, in their own words, goes here.
Testimonial slot — ask a customer who switched from a competitor: "What was the difference you noticed in the first month?" Specific answers about approvals, communication, or waste work best.
Testimonial slot — ask an international customer: "Why do you keep ordering from India instead of a local supplier?" Their answer removes the biggest doubt overseas buyers have.
Add 4–6 customer logos here — with their permission. Even small, lesser-known names build more trust than an empty space.
Fill this template with your first documented trial job — before/after numbers turn claims into evidence.
[ Customer's situation — e.g. "A flexible packaging converter in [country] faced repeated press rejections on a 6-colour job. Their previous supplier's plates required 3 rounds of density correction at every makeready." ]
[ The 5S steps used — e.g. "We studied their press configuration and anilox setup, set achievable targets in writing, and engineered NX plates specifically for their ink system and substrate." ]
[ Measured outcome — e.g. "fewer replates in the first quarter, approval on first pull for 9 of 10 jobs, make-ready time cut by X minutes per job." Use real numbers from the trial. ]
Start with one trial job — we measure everything, so you see the difference in numbers.
Sree Bloomy Graphic House was founded in 2015 in Bangalore by K.C. Mohan — a production specialist with deep expertise in flexographic plate manufacturing and prepress.
The founding belief: most print problems are created upstream — in the file, in the prepress decisions, in the communication between customer and supplier. That's exactly where they need to be solved.
We built our facility around Kodak Flexcel NX plate technology and Esko CDI imaging. Then we built a process around those machines — the File-to-Press 5S Method. Study, Set, Standardize, Supply, Support.
Today we serve flexo converters of all sizes, across labels, flexible packaging and corrugated — in India and internationally across Asia, the Middle East, and Africa.
We believe production teams should never absorb someone else's mistake. Not a bad file. Not an assumption made without press data. Not a communication gap because a vendor's contact changed.
We reject the idea that quality problems are normal and unavoidable. They are not.
Our mission: replace hope-based approvals with predictable press performance — through qualified prepress, modern automation, and single-point accountability.
Prepress should be judged by press performance. Not file cleanliness.
Production specialist and technical backbone of Sree Bloomy Graphic House. Deep expertise in flexographic plate manufacturing and press-side performance. Founded the company in 2015 on the belief that quality starts upstream.
Printing Technology graduate, Manipal University. Leads customer acquisition, international market development, and the structured growth of Sree Bloomy Graphic House. Your primary contact for all new enquiries.
— K.C. Mohan, Chairman & Founder, Sree Bloomy Graphic House
No commitment. No vendor switch. Tell us your press setup and job details — we'll respond with exactly how we'd approach it.
After you submit: your enquiry opens directly in WhatsApp, pre-filled — one tap to send. Hemanth reviews and responds personally, typically within a few hours.
More detail = more specific response. Commercials discussed after we understand your setup.
Your enquiry opens in WhatsApp pre-filled — nothing is stored on this website.